Wavlink AERIAL HD2 – AC600 Dual-band High Power Outdoor Extender Configuration

This article explores the techniques for setting up Wavlink Aerial HD2 outdoor extender with AC600 capability. This extender can function as a router, repeater, or LAN bridge, offering versatility for internet connectivity. The Wavlink Aerial HD2 outdoor extender setup AC600 amplifies Wi-Fi signals, removing dead zones and ensuring uninterrupted connectivity in outdoor spaces. We can set up the Wavlink Aerial extender in below mentioned ways:-

1. Router

2. Repeater

3. Lan Bridge

Wavlink Aerial HD2 outdoor extender setup in Repeater Mode

The following steps outline the method for setting up the Wavlink Aerial HD2 outdoor extender in repeater mode:

1. Begin by connecting the Aerial HD2 to a power source.

2. Wait until the AC600 has a solid green signal before connecting the ethernet connection from the POE to the extender.

3. Connect to the default network using a compatible web browser.

4. Go to ap. setup and access the configuration page.

5. Congratulations! You have successfully accessed the configuration page for the Wavlink Aerial HD2 outdoor extender.

6. Log in using your username (SSID) and password, then follow the steps provided.

7. The Wavlink Aerial HD2 outdoor extender has now been successfully set up as a repeater, amplifying the Wi-Fi signal and expanding coverage to previously unreachable areas.

By following these steps, you can easily complete Wavlink Aerial HD2 outdoor extender Setup in repeater mode and enjoy improved Wi-Fi coverage in your outdoor spaces.

Setting Up the Wavlink Aerial HD2 AC600 Outdoor WiFi Extender in Router Mode

For Wavlink Aerial HD2 outdoor extender setup in router mode, follow the steps below:

1. Start by plugging the Wavlink Aerial HD2 AC600 into a power supply.

2. Connect the ethernet wire from the POE box to the Aerial HD2 extender.

3. Connect the other Ethernet cable to the primary router or modem using the same connector box.

4. Connect your wirelessly capable devices such as mobile, PC, laptop, etc to the WAVLINK-N network.

5. After connecting, go to wifi.wavlink com or default IP address 192.168.10.1 and navigate to the setup page for the AC600 outdoor extender.

6. To complete the setup process, please adhere to the instructions provided.

7. The Wavlink Aerial HD2 outdoor extender setup in router mode is now complete, providing strong and stable Wi-Fi coverage in your outdoor spaces.

In conclusion, by following these steps, you can easily set up the Wavlink Aerial HD2 outdoor extender in router mode and enjoy improved Wi-Fi coverage in your outdoor spaces.

Updating Firmware for AERIAL HD2 - AC600 Outdoor WiFi Extender

If you want to improve the performance and security of your Wavlink Aerial HD2 outdoor extender, updating its firmware is recommended. Follow these steps to update the firmware of your AERIAL HD2 – AC600 Dual-band High Power Outdoor Wifi extender:

1. First, log in to your AERIAL HD2 – AC600 Dual-band High Power Outdoor Wireless by visiting wifi.wavlink com and entering your SSID(Username) and Password.

2. Click on the Menu icon on the webpage, where you will find the firmware update option.

3. You will find the option to check for updates on the firmware update webpage.

4. If an update is available, follow the steps described on the web page to complete the firmware update.

Updating the firmware of your Wavlink Aerial HD2 outdoor extender can enhance its performance and security, providing you with a better Wi-Fi experience. By following the above steps, you can easily update the firmware of your Wavlink Aerial HD2 outdoor extender, improving its performance and security.

How to Reset the Wavlink Aerial HD4 Outdoor Wifi Extender?

To reset your Wavlink Aerial HD2 outdoor extender and recover lost passwords or usernames:

1. Locate the reset or factory reset button on the extender's side or bottom panel.

2. Use a toothpick or similarly sized object to press and hold the button for 8-10 seconds.

3. The extender will be reset and ready for a new setup.

Resetting the extender erases all previous settings, and you will need to set it up from scratch.

In case you face any difficulties while setting up your Wavlink WiFi extender, please do not hesitate to reach out to our technical specialists through our toll-free helpline or live chat. They will be happy to assist you at no cost.