Comfast Extender Setup is the best solution to all of your internet-related problems. They progressively boost your wireless network's signal and distribute it around your home. As a result, repeaters eradicate all dead spots in your home.
To set up your Comfast extender, follow the instructions below:
Unpack the Comfast range extender and connect it to the router.
To begin the configuration, wait for the wireless repeater's LED to illuminate.
Utilize any wireless device, such as a laptop or smartphone.
Navigate to your device's network settings and connect with the extender WIFI.
Now launch your web browser and type ap.setup into the address bar or 192.168.10.1.
Type in the default username and password.
Choose the signal you want to repeat.
Enter your router's WiFi password.
Wait 10 to 15 seconds for your router and repeater to sync and connect.
You have just installed your WiFi range extender successfully.
Comfast WIFI range extender configuration with 192.168.10.1
Here are points that can help you for your Comfast extender setup via Wavlink extender default IP address 192.168.10.1 are:
First, connect the Wi-Fi device to the COMFAST Ext network.
Open the web browser and fill in the IP address 192.18.10.1.
You have arrived at the Comfast WIFI range extender configuration page.
Enter your default username and password.
Choose Repeater on your PC/Laptop; this option will not be available on phones.
The repeater will automatically search for available Wi-Fi networks.
Choose the network that you want to improve.
Enter your home router or modem's password.
Wait for 30 seconds while the settings are applied.
You've finally finished installing the wireless booster.
Comfast extender Setup with WPS method
WPS (Wi-Fi Protected Setup) is a network security standard that enables for the simple and secure setup of a wireless home network. It enables users to add new devices to an existing wireless network with no setup or configuration. WPS also adds a layer of protection by requiring a PIN or button-based authentication.
Here are some steps for Comfast extender setup via wps method are:
Place the Comfast booster next to the primary Wi-Fi router.
Press and hold the Wireless Protected Setup (WPS) button on your repeater for around 10 seconds.
Now, press and hold the WPS connection button on your modem or router.
The blue LEDs on the WiFi signal are blinking, indicating that the modem and wireless booster are connecting.
Once your device was connected successfully. The Comfast Wi-Fi repeater hitch attachment is known as Home Network PLUS.
You will only be required to enter your password once as a security measure.
Now that your repeater is operational, put it wherever you choose.
How to Update Comfast wifi Extender Firmware
Firmware is a software program on a physical device that performs functions such as basic input/output chores and provides instructions for the device to interface with other computing devices.
Launch a web browser on any device that is linked to the extender's network.
Log in by opening the extender page.
Tap the Menu icon when it appears in the browser.
The firmware upgrade page will be launched:
Just select Settings, followed by Firmware Update.
If that option isn't available, pick Maintenance and then Firmware Update.
Now, click Check Online to see if any adjustments have been made.
Regardless of whether there is a new upgrade available, follow the instructions to update the firmware on your extender.
How to Reset Comfast wifi extender?
Performing a Comfast WiFi extender reset is the best Comfast WiFi extender troubleshooting advice for fixing a variety of problems. Learn how to reset the Comfast WiFi extender by following the below-mentioned steps.
Check to make sure your Comfast WiFi extender is plugged into a functional power outlet.
Check your Comfast device's exterior on all sides to locate the Reset button after verification.
Thereafter, press the button with care using a small pin or toothpick.
Let the Comfast WiFi extender reset process get completed.
That's the entire procedure for how to reset a Comfast WiFi extender. After completing the Comfast WiFi extender reset process, you will see that your extender has returned to its factory default settings. As a result, go back to the Comfast Extender login page and reinstall your device.
How to set up the Comfast WIFI range extender in repeater mode?
To configure the Comfast WiFi repeater, connect it to an electrical outlet.
Connect your device using a tablet or a laptop.
Then, in the wifi settings, connect to the EXT network.
On your device, open any web browser and type https://ap.setup.
Use "ADMIN" as your login and password.
Then, select "Repeater" and follow the instructions on the screen.
The primary router or modem repeater mode is now connected to your booster.
Please contact our 24/7 trained expert if you need help installing or logging onto the Comfast Extender Setup page.